The Connect Bluetooth transmitter for TV features digital and analog audio inputs, dual headphone or speaker connectivity, and Qualcomm aptX technology for high fidelity, low latency audio. 

Includes 

●       One (1) Connect Bluetooth Transmitter

●       One (1) Micro-USB charging cable

●       One (1) 3.5 mm audio cable

●       One (1) 3.5 mm to RCA audio cable

●       One (1) Digital Optical SPDIF audio cable

●       User manual

Features

●       Designed to enable TVs and other devices to stream full-range, crystal clear digital sound wirelessly to up to two Bluetooth headphones or speakers for the ultimate music and movie experience

●       High Fidelity wireless audio

●       Equipped with Bluetooth version 4.0 and aptX Low Latency technology

●       Dual-headphone streaming: Pairs with up to two headphones or speakers simultaneously

●       Supports 3.5 mm headphone jack, RCA, or TOSLINK digital optical (SPDIF) audio connections

●       Easy set-up and travel-friendly design

●       Operating range of up to 30 ft (10 m)

●       Compatible with both new and old TVs

●       Built-in rechargeable battery provides up to 12 hours of playtime

●       Fully charges in approx. 1.5 hours

●       Measures 2.2” x 2.2” x 1”

●       Weighs 1.1 oz

●       1 Year Limited Warranty

How to Use

●       All necessary cables are included for easy plug and play. Refer to user manual for best setup practices

●       To turn the Connect T1 on/off, toggle the power switch

●       The Connect T1 has a built-in rechargeable battery, so it’s possible to operate the unit without being plugged into a power source. To avoid recharging, it is recommended to keep the unit plugged into a wall outlet

●       To enter Bluetooth pairing mode, press the “A” button once. A solid blue light indicates a device has been paired

●       To pair a second device, press the “B” button once. A solid blue light indicates a device has been paired

●       Set your TV audio output setting to PCM for optical compatibility

●       Use aptX Low Latency-enabled headphones for best results

Care Instructions

●       Taking care of your device in accordance with the following recommendations will ensure optimal performance and a long lifespan

●       Battery performance will be severely decreased when stored in extreme temperatures: below -10°C/14°F or above 45°C/113°F including direct sunlight

●       Clean with a soft, slightly damp cloth. Do not use chemical cleaners

●       There are no user replaceable/reparable parts in the transmitter

●       Disassembling it will void your warranty

●       Do not expose to liquids. If the device comes in contact with liquids, quickly wipe away. If submersed in water, do not turn the device on until completely dried. Note: liquid submersion voids the warranty

●       Do not use around flammable gasses as fire or explosion may occur